Light Oil ON/OFF Monobloc Burner
Ürünler
Kapasite min. kw
Kapasite max. kw
SC 1.1 LS Light Oil ON/OFF Monobloc Burner
18
120
SC 1.1 LS Light Oil ON/OFF Monobloc Burner
Technical information
SC. 1.1 LS | |||||
|---|---|---|---|---|---|
| Capacity | Kw/h | Min | 18 | ||
| Max | 120 | ||||
| kcal/h | Min | 15.480 | |||
| Max | 103.200 | ||||
l/h | Min | 2 | |||
| Max | 10 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor Kw | 0,15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 1.2 LS Light Oil ON/OFF Monobloc Burner
50
180
SC 1.2 LS Light Oil ON/OFF Monobloc Burner
Technical information
SC. 1.2 LS | |||||
|---|---|---|---|---|---|
| Capacity | Kw/h | Min | 50 | ||
| Max | 180 | ||||
| kcal/h | Min | 43.000 | |||
| Max | 154.800 | ||||
l/h | Min | 5 | |||
| Max | 16 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor Kw | 0,15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 2.1 LS Light Oil ON/OFF Monobloc Burner
80
280
SC 2.1 LS Light Oil ON/OFF Monobloc Burner
Technical information
SC. 2.1 LS | |||||
|---|---|---|---|---|---|
| Capacity | Kw/h | Min | 80 | ||
| Max | 280 | ||||
| kcal/h | Min | 68.800 | |||
| Max | 240.800 | ||||
l/h | Min | 7 | |||
| Max | 24 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor Kw | 0,15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 2.2 LS Light Oil ON/OFF Monobloc Burner
100
360
SC 2.2 LS Light Oil ON/OFF Monobloc Burner
Technical information
SC. 2.2 LS | |||||
|---|---|---|---|---|---|
| Capacity | Kw/h | Min | 100 | ||
| Max | 360 | ||||
| kcal/h | Min | 86.000 | |||
| Max | 309.600 | ||||
l/h | Min | 9 | |||
| Max | 31 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor Kw | 0,15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 3.1 LS Light Oil ON/OFF Monobloc Burner
110
500
SC 3.1 LS Light Oil ON/OFF Monobloc Burner
Technical information
SC. 3.1 LS | |||||
|---|---|---|---|---|---|
| Capacity | Kw/h | Min | 110 | ||
| Max | 500 | ||||
| kcal/h | Min | 94.600 | |||
| Max | 430.000 | ||||
l/h | Min | 10 | |||
| Max | 43 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor Kw | 0,15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Light oil, viscosity 6 mm2 / s at 20 ° C, PCI11,86 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The mono-stage organization of the power is really more advantageous compared to our rivals.
6. A customized type of sensor is used for sequentially installment of several generators.
7. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
8. It has the characteristics of proper functioning in different combustion chambers.
9. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
10. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
11. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
12. Standard protection of IP 54 mechanical parts.
13. IP 65 protection on demand.
14. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
15. It includes all the cables and power supply of the burner management system.
16. Includes impermeability control.
17. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676