Heavy oil burner Two stages
Ürünler
Kapasite min. kw
Kapasite max. kw
SC 3.1 HZ Heavy oil burner Two stages
110
500
SC 3.1 HZ Heavy oil burner Two stages
Technical information
SC. 3.1 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 110 | ||
| Max | 500 | ||||
| kcal/h | Min | 94.600 | |||
| Max | 430.000 | ||||
l/h | Min | 10 | |||
| Max | 63 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor kW | 0,37 | ||||
| Pump Motor kW | 0,15 | ||||
| Heater | |||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 3.2 HZ Heavy oil burner Two stages
130
650
SC 3.2 HZ Heavy oil burner Two stages
Technical information
SC. 3.2 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 130 | ||
| Max | 650 | ||||
| kcal/h | Min | 111.800 | |||
| Max | 559.000 | ||||
l/h | Min | 11 | |||
| Max | 58 | ||||
| Power Supply | 1N-50 Hz 230V | ||||
| Motor kW | 0,37 | ||||
| Pump Motor kW | 0,25 | ||||
| Heater | |||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 5.1 HZ Heavy oil burner Two stages
200
750
SC 5.1 HZ Heavy oil burner Two stages
Technical information
SC. 5.1 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 200 | ||
| Max | 750 | ||||
| kcal/h | Min | 172.000 | |||
| Max | 645.000 | ||||
l/h | Min | 18 | |||
| Max | 67 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 0,75 | ||||
| Pump Motor kW | 0,37 | ||||
| Heater | 4 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 5.2 HZ Heavy oil burner Two stages
260
950
SC 5.2 HZ Heavy oil burner Two stages
Technical information
SC. 5.2 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 260 | ||
| Max | 950 | ||||
| kcal/h | Min | 223.600 | |||
| Max | 817.000 | ||||
l/h | Min | 23 | |||
| Max | 86 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 1,5 | ||||
| Pump Motor kW | 0,37 | ||||
| Heater | 4 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 8.1 HZ Heavy oil burner Two stages
330
1150
SC 8.1 HZ Heavy oil burner Two stages
Technical information
SC. 8.1 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 330 | ||
| Max | 1150 | ||||
| kcal/h | Min | 283.800 | |||
| Max | 989.000 | ||||
l/h | Min | 29 | |||
| Max | 104 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 1,5 | ||||
| Pump Motor kW | 0,55 | ||||
| Heater | 6 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 8.2 HZ Heavy oil burner Two stages
430
1600
SC 8.2 HZ Heavy oil burner Two stages
Technical information
SC. 8.2 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 430 | ||
| Max | 1600 | ||||
| kcal/h | Min | 369.800 | |||
| Max | 1.376.000 | ||||
l/h | Min | 38 | |||
| Max | 144 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 2,2 | ||||
| Pump Motor kW | 0,55 | ||||
| Heater | 6 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 8.3 HZ Heavy oil burner Two stages
580
2100
SC 8.3 HZ Heavy oil burner Two stages
Technical information
SC. 8.3 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 580 | ||
| Max | 2100 | ||||
| kcal/h | Min | 498.800 | |||
| Max | 1.806.000 | ||||
l/h | Min | 52 | |||
| Max | 188 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 3 | ||||
| Pump Motor kW | 1,1 | ||||
| Heater | 9 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 10.1 HZ Heavy oil burner Two stages
850
2750
SC 10.1 HZ Heavy oil burner Two stages
Technical information
SC. 10.1 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 850 | ||
| Max | 2750 | ||||
| kcal/h | Min | 731.000 | |||
| Max | 2.365.000 | ||||
l/h | Min | 76 | |||
| Max | 246 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 3 | ||||
| Pump Motor kW | 1,1 | ||||
| Heater | 12 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 10.2 HZ Heavy oil burner Two stages
950
3200
SC 10.2 HZ Heavy oil burner Two stages
Technical information
SC. 10.2 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 950 | ||
| Max | 3200 | ||||
| kcal/h | Min | 817.000 | |||
| Max | 2.752.000 | ||||
l/h | Min | 86 | |||
| Max | 286 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 3 | ||||
| Pump Motor kW | 1,5 | ||||
| Heater | 15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
SC 10.3 HZ Heavy oil burner Two stages
950
4000
SC 10.3 HZ Heavy oil burner Two stages
Technical information
SC. 10.3 HZ | |||||
|---|---|---|---|---|---|
| Capacity | kW/h | Min | 950 | ||
| Max | 4000 | ||||
| kcal/h | Min | 817.000 | |||
| Max | 3.440.000 | ||||
l/h | Min | 86 | |||
| Max | 358 | ||||
| Power Supply | 3N-50 Hz 380V | ||||
| Motor kW | 5,5 | ||||
| Pump Motor kW | 1,5 | ||||
| Heater | 15 | ||||
| Gas Input Pressure | 21-300 | ||||
More information
1. The following fuels can be used:
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676
Heavy fuel, viscosity 50°E at 50 ° C, PCI 10,97 kWh / kg
2. It is suitable for steam, hot water boiler, ovens, driers, heat oil generators, etc.
3. The flame can be adjusted according to the combustion chamber.
4. Burning hood, ventilation system, control panel, gas pipe could be selected according to special conditions of each installation.
5. The two-stage regulation of the power is really more advantageous compared to our rivals.
6. Flame monitoring is easy and reliable thanks to the UV sensor.
7. A customized type of sensor is used for sequentially installment of several generators.
8. The facility of heating and the use of preheated combustion air while enabling energy saving in increasing the efficiency of the burning through economiser used by the system.
9. It has the characteristics of proper functioning in different combustion chambers.
10. Reduces the specific emission amount of nitric oxide (NOx) gas to a minimum by obtaining an optimum mixture of combustible air thanks to the customized design of its combustion hood.
11. It provides easy installation and operating conditions in confined spaces thanks to its compact dimensions.
12. It enables operation in high backpressure combustion chambers by placing a high-pressure ventilation system.
13. Standard protection of IP 54 mechanical parts.
14. IP 65 protection on demand.
15. Internal or external optional circulation of combustion gases in order to reduce NOx emissions.
16. It includes all the cables and power supply of the burner management system.
17. Includes impermeability control.
18. Compliance with the following directives:
89/336(2004/108)EEC
73/23/EEC
98/37/EEC
EN 676